Remove the hard drive backplane.
6.
To replace the component:
Install the hard drive backplane. Press down on the hard drive backplane retainer to seat the board.
1.
Install the hard drives
2.
Install the hard drive blanks
3.
Install the access panel
4.
Install the server blade.
5.
Front panel/hard drive cage assembly
To remove the component:
Power down the server blade (on page 23).
1.
Remove the server blade (on page 24).
2.
("Hard
drive" on page 26).
("Hard drive
blank" on page 26).
("Access
panel" on page 25).
Removal and replacement procedures 33