Table of Contents
Advertisement
Remove the capacitor pack.
5.
Remove the capacitor pack holder.
6.
To replace the component, reverse the removal procedure.
Recovering data from the flash-backed write cache
If the server fails, use the following procedure to recover data temporarily stored in the FBWC.
CAUTION:
electrostatic discharge
Perform one of the following:
1.
Set up a recovery server using an identical server model. Do not install any internal drives or FBWC
o
in this server. (HP recommends this option.)
Before starting this procedure, read the information about protecting against
("Preventing electrostatic
discharge" on page 28).
Removal and replacement procedures 69
Advertisement
Table of Contents
