Table of Contents
Advertisement
Remove the fan board.
7.
To replace the component, reverse the removal procedure.
DIMMs
To remove the component:
Power down the server (on page 31).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 32).
o
Remove the server from the rack (on page 34).
o
Remove the access panel
4.
Remove the air baffle
5.
Open the DIMM slot latches.
6.
("Access
panel" on page 37).
("Air
baffle" on page 42).
Removal and replacement procedures 49
Advertisement
Table of Contents
