6
6.3
Positioning Documents on the Original Glass
The procedure for positioning the document differs depending on the type of docu-
ment being copied, therefore be sure the document is positioned correctly. For in-
formation on using the duplexing document feeder, refer to "Feeding the Document
Through the Duplexing Document Feeder" (page 6-5).
When placing the document directly on the original glass, position it with the orien-
tation shown below. Lift open the original cover, or the duplexing document feeder
if it is installed, 15° or more.
When loaded horizontally
15
To position sheet documents
Follow the procedure described below when copying plain paper or documents that
cannot be fed through the duplexing document feeder.
1
Lift open the original cover, or the
duplexing document feeder if it is
installed, and then position the
document face down on the
original glass.
6-8
6.3 Positioning Documents on the Original Glass
When loaded vertically
15
Di2010f/Di2510f/Di3010f/Di3510f