Chapter 14 Configuring Users; About Configuring Users; Configuration Methods; Common User Features - Digi TS W User Manual

Hide thumbs Also See for Digi TS W:
Table of Contents

Advertisement

Chapter 16

About Configuring Users

Common User Features

Feature
Automatically connects the user to the host specified on the autohost
field using the service (TCP port) defined on the autoport or
autoservice fields.
autoconnect
Autoconnection can also be implemented by port instead of by user.
This feature is configurable from the web interface.
Defines the type of access the user is restricted to. Menu, command
Default
line, autoconnect, and outgoing and netservice are the types.
access type
This feature is configurable from the web interface.
Defines the menu that is to be presented to a user with menu access.
Menu access
This feature is configurable from the web interface.
Defines the number of outbound ports a user connected over the LAN
can access at one time.
Port access
This feature is not configurable from the web interface.
PPP
Defines PPP-related parameters for the user.
Routing
Defines whether RIP routing updates are forwarded over the link to this
updates
user.
Chapter 16 Configuring Users
Although it is not required, the device server is often configured to
accommodate the requirements of particular users. Typical configurable
user attributes include the following:
Whether the user is required to supply a password
Autoconnection attributes, such as the system to which the user
should be automatically connected at login
The interface the device presents the user, such as a menu or
command line
Whether the user has access to outbound ports
Note:
For information on configuring PPP users, see "Configuring PPP" on page 27.

Configuration Methods

You can configure users in the following ways:
With the web interface.
With the set user command. See the set user command in the Digi
One/PortServer TS Command Reference.
This section discusses common user-related features. For a complete list,
see the set user command in the Digi One/PortServer TS Command
Reference.
C o n f i g u r i n g U s e r s
Description
set user Field
autoconnect
autohost
autoport
autoservice
defaultaccess
menu
maxsessions
There are too
many fields to list
here. See the set
user command
for more
information.
netrouting
69

Advertisement

Table of Contents
loading

Table of Contents