Table of Contents
Advertisement
Chapter 12
Controlling Access to the Configuration
Controlling Access to Inbound Ports
Chapter 12 Configuring Security Features
C o n f i g u r i n g S e c u r i t y F e a t u r e s
Controlling access of device server restricts access to the configuration by
defining the following types of users:
•
The root user, who has unlimited access to device server com-
mands. He or she can view any configuration table and change any
configuration parameter. The root is identified by the user name
root and must supply a password to be authenticated. The default
root password is dbps. You should change this password immedi-
ately.
•
Regular users, who have much more restricted access to device
server commands. Regular users can view some configuration
tables and can change some configuration parameters related to
their own sessions and passwords. See the Digi One/PortServer TS
Command Reference for information on the limitations placed on
regular users for each command.
This section describes methods of controlling access to inbound serial
ports. An inbound port is one defined on the dev field of the set ports
command for one of the following device types:
•
term (used to define terminal connections)
•
min (used to define incoming modem connections)
•
mio (used to define bi-directional modem connections)
•
hdial, hio (used to define computer connections)
Default Access Restrictions
The default configuration for inbound ports is that a login and password are
required to access them.
Options for Removing Access Restriction
The login and password requirement for inbound ports can be changed by
configuring
•
The port so that it does not require a login and password. In this
case, no one is required to supply a login or password.
•
Specific users so that they do not require a password. In this case,
some users do not supply passwords and others are required.
Procedure for Changing a Port's Access Requirements
To configure a port so that no one has to login or specify a password,
supply a set logins command that specifies the following:
set logins range=range login=off passwd=off
57
Advertisement
Table of Contents
