Table of Contents
Advertisement
Chapter 7
Options for Configuring the Serial Ports
Configuring the Serial Port Settings with the Web Interface
Chapter 7
Configuring the Serial Ports
C o n f i g u r i n g t h e S e r i a l P o r t s
The device server serial ports can be configured using the following
methods:
•
Through the web interface
•
From the command line using the set config command ("Configuring
the Serial Port Settings from the Command Line" on page 26
serial ports can also be changed using the web interface or
command line.
1. Log on to the device by entering the IP address in the URL address bar
of your browser.
Note:
This procedure can only be used if an IP address has been set.
2. Enter the username root and password dbps.
3. Click Serial Ports under Configuration.
4. Click the port number that you want to configure.
The
.)
25
Advertisement
Table of Contents
