Table of Contents
Advertisement
Certifications
Chapter 19 Reference and Certifications
Standard Models Specifications
2-contact barrel
connector
Ambient
temperature
Relative
humidity
Altitude
Length
Width
Height
Weight
FCC Part 15 Class A
Radio Frequency Interference (RFI) (FCC 15.105)
This equipment has been tested and found to comply with the limits for
Class A digital devices pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential environment. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try and correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
Power Requirements
(Standard Models)
+9 to +30 VDC 525 mA (max)
external power supply
Environmental
0 to 50° Celsius
32 to 131° Fahrenheit
5% to 90% non-condensing
0 to 12,000 feet
0 to 3,658 meters
Mechanical
13.33 centimeters
5.25 inches
8.25 centimeters
3.25 inches
3.842 centimeters
1.306 inches
.227 Kilos
8 ounces
81
Advertisement
Table of Contents
