Max Gain Adjustment; Auto White Balance & Lv Standard Data Input; Auto White Balance Adjustment - Sony DCR-PC6E Service Manual

9. MAX GAIN Adjustment

Setting the minimum illumination.
If it is not consistent, the image level required for taking subjects in
low illuminance will not be produced (dark).
Subject Clear chart
(Color reproduction adjustment
frame)
Adjustment Page F
Adjustment Address 1D
Switch setting:
1) POWER .................................................................. CAMERA
2) NIGHT SHOT .................................................................. OFF
Adjusting method:
Order Page Address Data
1 0 01 01
2 6 96 00
3 6 97 22
4 6 01 6F
5 6 02
Note: The adjustment data will be automatically input to page: F, address:
1D
Processing after Completing Adjustments
Order Page Address Data
1 6 96 00
2 6 97 00
3 6 01 00
4 0 01 00
RadarW RadarW RadarW
Procedure
Set the data.
Set the data.
Set the data.
Set the data, and press PAUSE
button.
Check that the data changes to
"01". (Note)
Procedure
Set the data.
Set the data.
Set the data, and press PAUSE
button.
Set the data.
10. Auto White Balance & LV Standard Data Input
RadarW RadarW RadarW
Adjust the white balance reference at 3200K, and adjust the normal
coefficient of the light value.
Subject
Measurement Point
Measuring Instrument
Adjustment Page
Adjustment Address
Specified Value
Note1: This adjustment should be carried out upon completion of " Color
reproduction Adjustment".
Note2: After the power is turned on, this adjustment can be done only
once.
Note3: Check that the data of page: 6, address: 02 is "00". If not, to page:
6, address: 01, set data: 00, and press the PAUSE button.
Note4: Displayed data of page 1 of the adjustment remote commander.
1 : XX : XX
Switch setting:
1) POWER .................................................................. CAMERA
2) NIGHT SHOT .................................................................. OFF
Adjusting method:
Order Page Address Data
1 0 01
2 6 01
3 6 01
4 6 02
5 F 10
6 1
Note5: The adjustment data will be automatically input to page: F, address:
1E, 1F, 30 to 33.
Processing after Completing Adjustments
Order Page Address Data
1 6 01
2 F 10
3 0 01
4
5-23
Clear chart
(Color reproduction adjustment
frame)
Display data of page 1 (Note4)
Adjustment remote commander
F
1E, 1F, 30 to 33
0FE0 to 1020
LV data
Procedure
01 Set the data.
11 Set the data, and press PAUSE
button.
0D Set the data, and press PAUSE
button.
Check that the data changes to
"01". (Note5)
2E Set the data, and press PAUSE
button.
Check that the display data
(Note4) satisfies the specified
value.
Procedure
00 Set the data, and press PAUSE
button.
00 Set the data, and press PAUSE
button.
00 Set the data.
Perform "Auto White Balance
Adjustment".