Enlarging Images Recorded On Tapes - Tape Pb Zoom; Quickly Locating A Scene Using The Zero Set Memory Function - Sony DCR-PC6E Service Manual

Playing back a tape with digital
effects
Notes
•You cannot process externally input scenes
using the digital effect function.
•You cannot record images on a tape on your
camcorder when you have processed the image
using the digital effect function. However, you
can record images on a "Memory Stick"
(DCR-PC9E only) (p. 164, 170), or on a VCR
using your camcorder as a player.
Pictures processed by the digital effect
function
•Pictures processed by the digital effect function
are not output through the DV (DCR-PC9E)/
DV OUT (DCR-PC6E) jack.
•You cannot use the PB ZOOM function for
pictures processed by the digital effect function.
When you set the POWER switch to OFF
(CHARGE) or stop playing back
The digital effect function is automatically
canceled.
86
Enlarging images recorded on
tapes – PB ZOOM
Notes
•You cannot process externally input scenes
using the PB ZOOM function with your
camcorder.
•You cannot record images on a tape on your
camcorder when you have processed the image
using the tape PB ZOOM function. However,
you can record images on a "Memory Stick"
(DCR-PC9E only) (p. 164, 170), or on a VCR
using your camcorder as a player.
The PB ZOOM function is automatically
canceled when you operate the following
functions:
– Set the POWER switch to OFF (CHARGE)
– Stop playing back
Images in the PB ZOOM
Images in the PB ZOOM mode are not output
through the DV (DCR-PC9E)/DV OUT (DCR-
PC6E) jack.
In the PB ZOOM mode
If you press DISPLAY/ TOUCH PANEL button,
the frame on the PB ZOOM screen disappears.
You cannot move the part you pressed to the
centre of the screen.
Edge of the enlarged image
The edge of the enlarged image cannot be
displayed at the centre of the screen.
88
Enlarging images
recorded on tapes
– Tape PB ZOOM
You can enlarge playback images recorded on
tapes. Besides the operation described here, your
camcorder can enlarge still images recorded on
"Memory Stick"s (p. 196) (DCR-PC9E only).
(1) In the playback or playback pause mode,
press FN and select PAGE2.
(2) Press PB ZOOM. The PB ZOOM screen
appears.
(3) Press the area you want to enlarge in the
frame on the PB ZOOM screen.
The area you pressed moves to the centre of
the screen, and the playback image is
enlarged at twice the size. If you press the
other area again, the area moves to the centre
of the screen.
1
FN
To cancel the PB ZOOM function
Press END.
Quickly locating a
scene using the zero
set memory function
Your camcorder goes forward or backward to
automatically stop at a desired scene having a
tape counter value of "0:00:00". Use the Remote
Commander for this operation.
(1) In the playback mode, press DISPLAY on the
Remote Commander if the counter is not on
the screen.
(2) Press ZERO SET MEMORY on the Remote
Commander at the point you want to locate
later. The tape counter shows "0:00:00" and
the ZERO SET MEMORY indicator flashes.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the tape
counter's zero point. The tape stops
automatically when the tape counter reaches
approximately zero. The ZERO SET
MEMORY indicator disappears and the time
code appears.
(5) Press N. Playback starts from the counter's
zero point.
DISPLAY
m
x
Notes
•When you press ZERO SET MEMORY before
rewinding the tape, the zero set memory
function will be canceled.
•There may be a discrepancy of several seconds
between the time code and the tape counter.
•The ZERO SET MEMORY indicator disappear
when you press FN.
If a tape has a blank portion in the recorded
portions
The zero set memory function may not work
correctly.
1-20
(1)
(2)
(3)
2,3
PB ZOOM
PB
ZOOM
END
(1)
(2)
(3) x
(4) m
(5) N
ZERO SET MEMORY
N
87
89