Using Special Effects - Picture Effect; Using Special Effects - Digital Effect - Sony DCR-PC6E Service Manual

Using the fader function
Note
You cannot use the following functions while
using the fader function. Also, you cannot use
the fader function while using the following
functions.
– Digital effect
– Low lux mode of PROGRAM AE (Overlap,
Wipe or Dot function only)*
– Super NightShot
– Tape Photo recording
– Interval recording
– Cut recording
* If you operate your camcorder while the fader
function is in use, the Low lux mode indicator
flashes and you cannot use the fader function.
When you select OVERLAP, WIPE or DOT
Your camcorder automatically stores the image
recorded on a tape. As the image is being stored,
and the playback picture disappears. At this
stage, the picture may not be recorded clearly,
depending on the tape condition.
While using the bounce function, you cannot
use the following functions:
– Exposure
– Flexible Spot Meter
– Focus
– Zoom
– Picture effect
Note on the bounce function
You cannot select the bounce function in the
following mode or functions:
– D ZOOM is set to 20× or 120× in the menu
settings
– Wide mode
– Picture effect
– PROGRAM AE
When the POWER switch is set to MEMORY
(DCR-PC9E only)
You cannnot use the fader function.
62
Using special effects
– Picture effect
To return to FN
Press EXIT.
To turn the picture effect function off
Select OFF in P EFFECT in the menu settings.
While using the picture effect function
You cannot select the old movie mode with the
digital effect function.
When you set the POWER switch to OFF
(CHARGE)
The picture effect is automatically canceled.
64
× ×
1-14
Using special effects
– Picture effect
You can digitally process images to obtain special
effects like those in films or on the TV.
NEG. ART [a] : The colour and brightness of the
picture are reversed.
SEPIA : The picture is sepia.
B&W : The picture is monochrome
(black-and-white).
SOLARIZE [b] : The light intensity is clearer, and
the picture looks like an
illustration.
PASTEL [c] : The contrast of the picture is
emphasized, and the picture
looks like an animated cartoon.
MOSAIC [d] :
The picture is mosaic.
[a] [b]
(1) In CAMERA mode, press FN to display
PAGE1.
(2) Press MENU, then select P EFFECT in in
the menu settings to select a desired picture
effect mode (p. 134).
1
FN
2
MANUAL SET
PROGRAM AE
P EFFECT
WHT BAL
AUTO SHTR
Using special effects
– Digital effect
You can add special effects to recorded pictures
using the various digital functions. The sound is
recorded normally.
STILL
You can record a still image so that it is
superimposed on a moving picture.
FLASH (FLASH MOTION)
You can record still image successively at
constant intervals.
LUMI. (LUMINANCEKEY)
You can swap a brighter area in a still image with
a moving picture.
TRAIL
You can record a picture so that an incidental
image like a trail is left.
SLOW SHTR (SLOW SHUTTER)
You can slow down the shutter speed. The slow
shutter mode is good for recording dark pictures
more brightly.
OLD MOVIE
You can add an old movie type atmosphere to
pictures. Your camcorder automatically sets the
wide mode to ON, picture effect to SEPIA, and
the appropriate shutter speed.
Still image/
STILL
Still image/
LUMI.
[a]
[b]
[c]
[d]
[c] [d]
(1)
(2)
STBY EXIT
OFF
NEG. ART
SEPIA
B&W
SOLARIZE
PASTEL
MOSAIC
EXEC RET.
Moving picture/
Moving picture/
63
65