Msw Code - Sony DCR-PC6E Service Manual

2-2. MSW Code

MSW when errors occur:
Information on MSW (mode SW) when errors occur
MSW when movement starts:
Information on MSW when movements starts when the mechanism position is moved (When the L motor is moved)
MSW of target of movement:
Information on target MSW of movement when the mechanism position is moved
Mechanical Position
← UNLOAD
BL BL
EJ ULE
LS chassis movement section
Lock released
Cassette compartment
Position Code
EJ
BL E
ULE A
SR
GL C
STOP
R/P
NULL
F
BL BL
SR GL STOP
Position at which the cassette component lock is released, at the farthest unload side mechanically
2
at which the mechanism can move no further in the UNLOAD direction.
BLANK code, at the boundary between codes.
EJECT completion position. when the cassette is ejected, the mechanism will stop at this position.
Cassette IN standby. The guide will start protruding out as the mechanism moves towards the
LOAD position.
8 Position at which it is possible to release the S ratchet.
Guide loading are performed here.
Stop position in the loading state. The pinch roller separates, the tension regulator returns, and the
4
brake is imposed on both reels.
PB, REC, CUE, REVIEW, PAUSE positions. When pinch roller is pressed, and the tension
6 regulator is ON, the mechanism is operating at this position in modes in which normal images are
shown.
0 Code not existing in the MD. Default value.
Status before finding any mechanism position.
LOAD →
BL
R/P
← A (MSB)
← B
← C
← D (LSB) (Fixed at "0")
Pinch roller pressing
Contents
5-54