Initialization Of B Page Data; (Dcr-Pc9/Pc9E); Initializing The B Page Data - Sony DCR-PC6E Service Manual

1-2-2.

INITIALIZATION OF B PAGE DATA

(DCR-PC9/PC9E)

Note: When reading the B page data, insert a "Memory Stick" into the
"Memory Stick" slot.
Switch setting:
POWER ................................................................. MEMORY

1. Initializing the B Page Data

Note: If the B page data has been initialized, the following
adjustments need to be performed again.
1) Modification of B page data
Adjusting page B
Adjusting Address 00 to FF
Initializing Method:
Order Page Address Data
1 0 01 01
2 2 8F 02
3 2 8F 03
4 2 8F 02
5 2 8F 00
6 5 0E 00
7 5 01 F3
8 5 00 01
9 5 0E
10
2. Modification of B Page Data
If the B page data has been initialized, change the data of the "Fixed
data-2" address shown in the following tables by manual input.
Preparations:
Order Page Address Data
1 2 8F 02
2 2 8F 03
3 2 8F 02
4 2 8F 00
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the camcorder may
not operate.
3) When changing the data, don't press the PAUSE
button.
Procedure
Set the data.
Set the data, and press PAUSE
button.
Set the data, and press PAUSE
button.
Set the data, and press PAUSE
button.
Set the data, and press PAUSE
button.
Set the data, and press PAUSE
button.
Set the data, and press PAUSE
button.
Set the data, and press PAUSE
button.
Check that the data changes to
"01".
Perform "Modification of B Page
Data".
Procedure
Set the data, and press PAUSE
button.
Set the data, and press PAUSE
button.
Set the data, and press PAUSE
button.
Set the data, and press PAUSE
button.
Processing after Completing Modification of B Page data:
Order Page Address Data
1 5 0E
2 5 01
3 5 00
4 5 0E
5 2 00
6 2 01
3. B Page Table
Note: Fixed data-1: Initialized data. (Refer to "1. Initializing the B Page
Data".)
Fixed data-2: Modified data. (Refer to "2. Modification of B Page
Data".)
Address
00 to FF Fixed data-1
5-12
Procedure
00 Set the data, and press PAUSE
button.
FB Set the data, and press PAUSE
button.
01 Set the data, and press PAUSE
button.
Check that the data changes to
"01". (The change data are written
in the flash memory.)
29 Set the data.
29 Set the data, and press PAUSE
button.
Remark
Table. 5-1-5.