Bernina bernette 0 Instruction Manual page 32

10 12 15
EN Winding the bobbin
1. Place an empty bobbin on the spindle.
2. Guide the thread to the left, and pass it
through the bobbin winder tension. Take
the thread to the right till you reach the
bobbin.
3. Wind the thread a few times by hand
around the empty bobbin in a clockwise
direction or pass the thread through one
of the holes on the bobbin inside out and
hold the thread. Push the bobbin to the
right towards the bobbin winding position.
Press the foot control gently. The bobbin
will stop winding when it is full. Push the
bobbin to the left to "sewing position" and
remove it.
Before threading the machine, cut the thread
near the hole of the bobbin.
Please note:
When the bobbin winder spindle is in
"bobbin winding" position, the machine and
the handwheel can not be operated.
To start sewing, push the bobbin winder
spindle to the left (sewing position).