Separating Power Steering Cylinder; Power Steering Cylinder - Kubota BX1860 Workshop Manual

BX1860, BX2360, BX2660, RCK48(P)-18BX, RCK54(P)-23BX, RCK60B-23BX, LA203, LA243, WSM

(2) Separating Power Steering Cylinder

Bonnet and Under Cover
1. Open the bonnet (1), and then loosen the knob bolts and pull
forward to remove the under cover (2).
2. Disconnect the connectors (3) for head light and remove the
bonnet bracket (4) with bonnet.
(1) Bonnet
(2) Under Cover
Front Axle Assembly
1. Remove the power steering hose cramp (1).
2. Place the garage jack under the front axle.
3. Remove the cotter pin (1).
4. Remove the slotted nut (2) of center pin and separate the front
axle from the frame.
5. Disconnect the power steering cylinder hoses (4).
(When reassembling)
• After mounting the front axle assembly to the frame, be sure to
adjust the front axle rocking force. (See page 3-S4.)
• Installing the cotter pin and be sure to split the cotter pin like an
anchor

Power steering cylinder

Tightening torque
hose
(1) Hose Cramp
(2) Cotter Pin
4-S6
STEERING
(3) Connector
(4) Bonnet Bracket
W1017472
24 to 27 N·m
2.4 to 2.8 kgf·m
18 to 20 lbf·ft
(3) Slotted Nut (Adjusting Nut for Front
Axle Rocking Force)
(4) Power Steering Hose
W1016448
KiSC issued 06, 2009 A