Kubota BX1860 Workshop Manual page 330

BX1860, BX2360, BX2660, RCK48(P)-18BX, RCK54(P)-23BX, RCK60B-23BX, LA203, LA243, WSM
Universal Joint
1. Pull back the coupler (3) of the universal joint (2).
2. Push the universal joint (2) onto the mid-PTO shaft (1), until the
coupler locks.
3. Slide the universal joint back and forward to make sure the
universal joint is locked securely.
IMPORTANT
• Finally, tug on the universal joint to make sure it is locked on
the PTO shaft.
(1) Mid-PTO Shaft
(2) Universal Joint
(3) Coupler
Rear Link
1. Set the cutting height control dial (1) to zero inch position.
2. Operate the tractor's hydraulic control lever (2) forward to lower
the mower rear links (3).
Attach the rear link (3) to the mower with the L-pins (4).
(1) Cutting Height Control Dial
(2) Hydraulic Control Lever
7-G11
G GENERAL
A : Tug
W69724158
(3) Rear Link
(4) L-pin
W96472687
KiSC issued 06, 2009 A