Kubota BX1860 Workshop Manual page 169

BX1860, BX2360, BX2660, RCK48(P)-18BX, RCK54(P)-23BX, RCK60B-23BX, LA203, LA243, WSM
PTO Clutch Operating Pressure
CAUTION
• When checking, park the tractor on flat ground, apply the
parking brake.
1. Lift the rear of the tractor and remove the left rear wheel.
2. Remove the plug (R 1/8), then install the adaptor (R 1/8), cable
and pressure gauge.
3. Start the engine and set at maximum speed.
4. Move the PTO clutch lever to "Engaged" position, and measure
the pressure.
5. If the measurement is not same as factory specifications, check
the PTO relief valve and related hydraulic components.
IMPORTANT
• Do not connect the universal joint of the implement to the
mid and rear PTO shaft.
NOTE
• When reinstall the hexagon socket head plug, apply liquid
lock (Three Bond 1324 or its equivalent) to the plug.
PTO clutch operating
Factory spec.
pressure
PTO clutch valve plug
Tightening torque
(R 1/8)
Condition
• Engine speed : Maximum
• Oil temperature : 45 to 55 °C
113 to 131 °F
Brake Pedal Free Travel
1. See page G-22.
2-S15
TRANSAXLE
1.0 to 1.3 MPa
2
11 to 13 kgf/cm
150 to 180 psi
13 to 21 N·m
1.3 to 2.2 kgf·m
9.4 to 15 lbf·ft
W1013552
W1013715
KiSC issued 06, 2009 A