Check Point Of Every 500 Hours; Check Point Of Every 800 Hours; Check Point Of Every 1500 Hours; Check Point Of Every 3000 Hours - Kubota BX1860 Workshop Manual

BX1860, BX2360, BX2660, RCK48(P)-18BX, RCK54(P)-23BX, RCK60B-23BX, LA203, LA243, WSM

[7] CHECK POINT OF EVERY 500 HOURS

[8] CHECK POINT OF EVERY 800 HOURS

[9] CHECK POINT OF EVERY 1500 HOURS

[10] CHECK POINT OF EVERY 3000 HOURS

[11] CHECK POINT OF EVERY 1 YEAR

Adjusting Front Axle Pivot
1. Remove the split pin (2), tighten the adjusting nut (1).
2. Make sure that one of the nut slots aligns with the split pin hole,
tighten the nut slightly if necessary to align.
3. Replace the split pin.
Tightening torque Factory spec.
(1) Adjusting Nut
Replacing Fuel Filter Element
1. Disconnect the fuel hoses and replace the fuel filter (2).
2. Disconnect the fuel hoses and loosen the pipe clamp to replace
the fuel filter (5).
NOTE
• If the fuel line is removed, be sure to properly bleed the fuel
system. (See page G-30.)
(1) Fuel Pump
(2) Fuel Filter
(3) Fuel Line
Adjusting Engine Valve Clearance
1. See page 1-S18.
Checking Fuel Injection Nozzle Injection Pressure
1. See page 1-S24.
Checking Injection Pump
1. See page 1-S23.
Replacing Air Cleaner Element
1. See page G-19.
G-25
G GENERAL
20 N·m
2.0 kgf·m
14 lbf·ft
(2) Split Pin
W1019713
(4) Hose Clamp
(5) Fuel Filter
W1019858
W1019995
W1020203
W1020260
W1020343
KiSC issued 06, 2009 A