Kubota BX1860 Workshop Manual page 216

BX1860, BX2360, BX2660, RCK48(P)-18BX, RCK54(P)-23BX, RCK60B-23BX, LA203, LA243, WSM
Front Gear Case Cover
1. Remove the front gear case mounting screws and remove the
front gear case cover (1) with bevel gear (2).
(When reassembling)
• Apply grease to the O-ring and take care not to damage it.
Front gear case cover
Tightening torque
mounting screw
(1) Front Gear Case Cover
(2) Bevel Gear
36T Bevel Gear and Front Axle Shaft
1. Remove the bearing (5).
2. Take out the 36T bevel gear (4).
3. Take out the collar (3).
4. Tap out the axle shaft (2).
(When reassembling)
• Install the oil seal (6) of front gear case cover (1), noting its
direction as shown in the figure.
(1) Front Gear Case Cover
(2) Axle Shaft
(3) Collar
3-S9
FRONT AXLE
48 to 55 N·m
4.9 to 5.7 kgf·m
36 to 41 lbf·ft
(3) Front Gear Case
W1013952
(4) 36T Bevel Gear
(5) Ball Bearing
(6) Oil Seal
W1014087
KiSC issued 06, 2009 A