BX1860, BX2360, BX2660, RCK48(P)-18BX, RCK54(P)-23BX, RCK60B-23BX, LA203, LA243, WSM
(3) Side Frames, Front Guard and Main Frames
Installing O-ring and Piston Seal
1. Place the slide jig (2) on the piston (4).
2. Install the O-ring (3) to the piston using the slide jig.
3. Install the piston seal (1) over the O-ring using the slide jig.
4. Compress the piston seal to the correct size by installing the
piston into the correcting jig (5).
NOTE
• Do not turn (roll) the piston seal as you install it.
(1) Piston Seal
(2) Slide Jig
(3) O-ring
Side Frames
1. Remove the pins (2), (5).
2. Remove the side frames (1) from the boom assembly (3) and the
boom cylinder (4).
(1) Side Frame
(2) Pin
(3) Boom Assembly
Front Guard
1. Remove the front guard (1).
(1) Front Guard
Main Frames
1. Remove the main frame mounting bolts and nuts (2) from the
tractor body.
2. Remove the main frame (1).
Main frame mounting bolt
Tightening torque
(M14)
(1) Main Frame
8-S9
FRONT LOADER
(4) Piston
(5) Correcting Jig
W1018621
(4) Boom Cylinder
(5) Pin
W1015835
W1015954
147 N·m
15.0 kgf·m
108 ft-lbs
(2) Main Frame Mounting Bolt
W1016042
KiSC issued 06, 2009 A