Kubota BX1860 Workshop Manual page 259

BX1860, BX2360, BX2660, RCK48(P)-18BX, RCK54(P)-23BX, RCK60B-23BX, LA203, LA243, WSM
Fuel Tank
1. Drain the fuel.
2. Disconnect the lead wire from fuel level sensor and fuel hoses
from the fuel tank (1).
3. Remove the fuel tank stays (2), (3) and cushions, then remove
the fuel tank (1).
4. Remove the PTO cover (4).
(When reassembling)
Fuel tank stay mounting
Tightening torque
bolt and nut
(1) Fuel Tank
(2) Fuel Tank Stay LH
Fender Center Stay
1. Remove the fender bracket (2).
2. Remove the fender center stay (1).
(When reassembling)
Fender bracket mounting
Tightening torque
bolt
(1) Fender Center Stay
Mower Linkage and Wire Harness
1. Disconnect the mower linkage (2).
2. Remove the wire harness clamp and wire harness (1) move to
the front side.
(1) Wire Harness
5-S9
HYDRAULIC SYSTEM
48 to 55 N·m
4.9 to 5.7 kgf·m
36 to 41 lbf·ft
(3) Fuel Tank Stay RH
(4) PTO Cover
W1027629
124 to 147 N·m
12.6 to 15.0 kgf·m
91.2 to 108 lbf·ft
(2) Fender Bracket
W1027820
(2) Mower Linkage
W1027951
KiSC issued 06, 2009 A