Handling Of Circuit Tester - Kubota BX1860 Workshop Manual

BX1860, BX2360, BX2660, RCK48(P)-18BX, RCK54(P)-23BX, RCK60B-23BX, LA203, LA243, WSM

[5] HANDLING OF CIRCUIT TESTER

• Use sandpaper to remove rust from terminals.
• Repair deformed terminal. Make certain there is no terminal
being exposed or displaced.
(1) Exposed Terminal
(2) Deformed Terminal
• Make certain that there is no female connector being too open.
(A) Correct
• Make certain plastic cover is large enough to cover whole
connector.
(1) Cover
• Use tester correctly following manual provided with tester.
• Check for polarity and range.
G-6
G GENERAL
(3) Sandpaper
(4) Rust
W10123460
(B) Incorrect
W10124300
(A) Correct
(B) Incorrect
W10125190
W10126840
KiSC issued 06, 2009 A