Kubota BX1860 Workshop Manual page 92

BX1860, BX2360, BX2660, RCK48(P)-18BX, RCK54(P)-23BX, RCK60B-23BX, LA203, LA243, WSM
Bonnet and Under Cover
1. Open the bonnet (1), and then loosen the knob bolts and pull
forward to remove the under cover (2).
2. Disconnect the connectors (3) for head light and remove the
bonnet bracket (4) with bonnet.
(1) Bonnet
(2) Under Cover
Accelerator Wire, Bonnet Post, Fuel Hoses, Wiring Harness and
Others
1. Disconnect the wiring harness (4) from coolant temperature
switch, stop solenoid, glow plug, starter motor, engine oil switch,
alternator and ground cable.
2. Disconnect the accelerator wire (2) and fuel hoses (3).
3. Remove the bonnet post (1).
(1) Bonnet Post
(2) Accelerator Wire
1-S27
ENGINE
(3) Connector
(4) Bonnet Bracket
W1064425
(3) Fuel Hose
(4) Wiring Harness
W1023496
KiSC issued 06, 2009 A