Check And Maintenance; Check Points Of Daily Or Each Use - Kubota BX1860 Workshop Manual

BX1860, BX2360, BX2660, RCK48(P)-18BX, RCK54(P)-23BX, RCK60B-23BX, LA203, LA243, WSM

5. CHECK AND MAINTENANCE

[1] CHECK POINTS OF DAILY OR EACH USE

Retightening Mower Blade Screw
CAUTION
• To avoid injury, always handle the mower blade with care.
1. Dismount the mower and turn it over to expose the mower
blades.
2. Wedge a block of wood securely between the mower blade and
mower deck.
3. Retighten the mower blade screw to the specified torque.
4. If the mower blade screw is worn or broken, replace it.
Tightening torque Mower blade screw
(1) Mower Blade Screw
Checking Gear Box Oil Level
1. Place the mower on level ground.
2. Loosen the check plug (1), and check to see if oil seems from the
opening.
3. If the oil level is low, remove the oil filler plug (2) and add new
gear oil.
IMPORTANT
• Use the specified gear oil.
Refer to "LUBRICANTS". (See page 7-G2.)
(1) Check Plug
(2) Oil Filler Plug
(3) Drain Plug
Greasing Universal Joint
1. Grease the internal splines (1) and grease nipples (2) of the
universal joint if the amount of grease is insufficient.
(1) Spline
7-G6
G GENERAL
98.1 to 117 N·m
10.0 to 12.0 kgf·m
72.4 to 86.7 lbf·ft
W12345678
[A] RCK60B-23BX, RCK54-23BX,
RCK48-18BX
[B] RCK48P-18BX, RCK54P-23B
W12378945
(2) Grease Nipple
W78945645
KiSC issued 06, 2009 A