Kubota BX1860 Workshop Manual page 180

BX1860, BX2360, BX2660, RCK48(P)-18BX, RCK54(P)-23BX, RCK60B-23BX, LA203, LA243, WSM
Check and High Pressure Relief Valve Plug
1. Remove the check and high pressure relief plug (G 1/2).
(When reassembling)
Check and high pressure
Tightening torque
relief valve plug (G 1/2)
(1) Center Section
(2) Plug
Check and High Pressure Relief Valve
1. After removing the plug (1), draw out the spring (3) and the check
and high pressure relief valve assembly (4) (5).
(When reassembling)
• Take care not to damage the O-ring (2) on the plug (1).
• Since there is an orifice (1.5 mm, 0.059 in.) in the check and relief
valve body (reverse) (5), re-install the check and relief valve (4)
(5) to their original positions.
(1) Plug
(2) O-ring
(3) Spring
2-S26
TRANSAXLE
59 to 78 N·m
6.0 to 8.0 kgf·m
44 to 57 lbf·ft
(3) Plug
W1087469
(4) Check and Relief Valve (Forward)
(5) Check and Relief Valve (Reverse)
W1087625
KiSC issued 06, 2009 A