Toshiba e-STUDIO182 Service Manual page 172

Notes:
1. When installing the process unit, make
sure that the connector (harness) is not
caught under the developer unit.
2. When closing the drawer of the
equipment, make sure that the connector
(harness) is not caught.
3. Make sure that the harness on the upper
part of the process unit does not contact
the frame of the equipment.
e-STUDIO182/212/242
DRUM RELATED SECTION
© 2009 TOSHIBA TEC CORPORATION All rights reserved
10 - 10
Fig. 10-8
Fig. 10-9