Upper Transport Roller; Lower Transport Roller - Toshiba e-STUDIO182 Service Manual

13.6.4

Upper transport roller

(1) Take off the ADU.
P.13-11 "13.6.1 Automatic Duplexing Unit
(ADU)"
(2) Take off the ADU motor.
P.13-12 "13.6.3 ADU motor (M8)"
(3) Remove 2 E-rings, 2 pulleys and 2 pins, and
then take off the timing belt.
(4) Remove 1 E-ring, 1 gear and 2 bushings,
and then take off the upper transport roller.
13.6.5

Lower transport roller

(1) Take off the ADU.
P.13-11 "13.6.1 Automatic Duplexing Unit
(ADU)"
(2) Remove 2 E-rings, 2 pulleys and 2 pins, and
then take off the timing belt.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Pin
Fig. 13-13
Upper transport roller
E-ring
Gear Bushing
Fig. 13-14
Pin
Fig. 13-15
AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0103)
13 - 13
Belt
Pulley
Pulley E-ring
Bushing
Belt
Pulley
Pulley E-ring
e-STUDIO182/212/242
13