Installation (Using The Tilt Stands) - GRAPHTEC MP303-04 User Manual

1.2 Installation (Using the Tilt Stands)

This plotter can be used in either a horizontal position or an upright position at a 60° tilt.
I For Horizontal Use
Be sure to install the plotter on a stable, flat surface for use.
I Using the Tilt Stands
Mount the plotter on the tilt stands provided with this plotter by following the steps below.
(1) Insert the two hooks in each stand into the holes in the plotter's base, and then gently pull each stand
upward to securely hook the stand into the plotter.
(2) Be sure to install the stand and plotter on a stable, flat surface.
Installation space: 67 mm x 45 mm
Installation space: 67 mm x 32 mm
1-4