Setting The Basic Functions - GRAPHTEC MP303-04 User Manual

2. SETTING THE BASIC FUNCTIONS

This chapter describes how to set your plotter's basic functions. Procedures for setting the following functions
are provided in this chapter.
(1) Command mode
(2) Paper size
(3) Programmable resolution
(4) Pen/Vector sorting
(5) Pen speed mode
(6) Interface conditions
I Setting
The basic functions are set using the panel keys while observing the display. The MP303-04 comes with its
basic functions set as follows.
Baud rate
Handshake mode
Data length
Parity
Command mode
Paper size
Programmable resolution
Vector/Pen sorting
Pen speed mode
Pen-up speed mode
: 9600 bps
: Hardwire
: 8 bits
: Even
: FP-GL
: ISO A3
: 0.1 mm (100 µm)
: ON
: Manual (ignore command input specifying the pen speed)
: NormalSp
2-1
MP303-04 display