I Using the POSITION Keys
(5) Move the pen carriage to the desired position by pressing the
The coordinates of the pen carriage's position are displayed while "X=" and "Y=" continue to blink.
Skip to Step (6).
I Direct numeric input
(5) Press the
M O D E
Use the
or
To switch between + and –, press the
desired numeral is displayed.
(6) When the desired origin position is displayed, press the
key instead of the
C AN C E L
When the
E N T E R
(7) When the message below appears, press the
X=+01000
Y=+01000
key to permit the new origin position to be selected by numeric input of the coordinates.
key to move to the column you wish to change (the selected column blinks).
X=+00000
Y=+00000
X=+00300
Y=+00000
key.
ENTER
key is pressed, the message below briefly appears.
X=
Y=
or
key. To set a numeral, press the
E N T E R
Offset
OK!
key to return to Ready mode.
MO D E
3-10
keys.
or
key. To cancel the setting, press the
key until the