Step 3 Starting The Scan Job - Fuji Xerox Document Centre C450 Quick Reference Manual

Below is an explanation of how to use the Scan to Mailbox feature.
1
Press the <All Services> button.
2
Select [Scan to Mailbox].
3
Specify the mailbox to save to.
4
If appropriate, select features to
configure from each tab.

Step 3 Starting the Scan Job

1
Press the <Start> button.
Important • If a document has been set in
Note
the document feeder, do not
press the document while it is
being conveyed.
• If a problem occurs, an error
message appears in the touch
screen. Remedy this by
following the message.
• The following job
configurations can be
performed while scanning.
Scanning Procedure
1 2 3
4 5 6
7 8 9
0 #
C
1 2 3
4 5 6
7 8 9
0 #
C
<All Services>
button
4
<Start> button
29