Table of Contents
Advertisement
4 Basic Operation
Copying Procedure
This section describes the basic copy operations.
Step 1 Loading Documents
There are two methods of loading documents.
Document Feeder
Single sheet
Multiple sheets
Document Glass
Single sheet
Bound documents, such as books
Document Feeder
The document feeder supports single sheet and multiple sheet documents, with sizes
ranging from 148.6 × 210mm (A5, A5 ) to a maximum of 297 × 432mm
(A3, 11 × 17 inches).
1
Remove any clips and staples
before loading the document.
2
In the center of the document
feeder, set the document with the
side to be copied (top side if 2
sided document) facing upwards.
Note
3
Adjust the movable document
guides to just touch the edge of the
document stack.
• The <Confirmation> indicator
lights when the document is
loaded correctly.
4
17
Advertisement
Table of Contents
