Control Panel - Fuji Xerox Document Centre C450 Quick Reference Manual

Control Panel

The following describes the names and functions of components on the control panel.
1
001 002 003 016 017 018
004 005 006 019 020 021
007 008 009
022 023 024
010 011 012 025 026 027
013 014 015 028 029 030
21
No. Component
1 Brightness dial
2 Touch screen
3 <Online> indicator
4 <Job in Memory> indicator
5 <Job Status>
6 <Review>
7 <Machine Status>
8 <Log In/Out>
9 <Power Saver>
10 <Clear All>
2
20
Adjusts the brightness of the touch screen. Use this dial to adjust the
brightness of touch screen when it is too dark to read.
This touch screen displays messages required for operation and buttons
for various features. You can directly touch the touch screen to instruct
operations in screens and set features.
This indicator lights when data is being received from a client.
This indicator lights when data is stored in the machine's memory.
Pressing this button allows you to confirm or cancel currently executing
or completed jobs, or to confirm or print saved documents.
In text descriptions, this button is indicated as the <Job Status> button.
Press this button to open the Review screen. In this screen, you can
check a list of the status of copy, fax, and scan features whose settings
have changed from the defaults. You can also check the destination
information for sending faxes and e-mail.
In text descriptions, this button is indicated as the <Review> button.
Pressing this button allows you to confirm the machine status and
meters, check the state of consumables, and print reports.
In text descriptions, this button is indicated as the <Machine Status>
button.
When this button is pressed, the UserID input screen is displayed for
System Administration mode or Login Setup/Auditron Administration.
In text descriptions, this button is indicated as the <Log In/Out> button.
If the machine is not operated for a while, the machine's power
consumption is lowered to enter the Power Saver mode. In the Power
Saver mode, this button is lit. To cancel the Power Saver mode, press
this button again.
In text descriptions, this button is indicated as the <Power Saver>
button.
Returns the statuses of all displayed services to their default values.
The machine will be reset to this state after it is turned on.
In text descriptions, this button is indicated as the <Clear All> button.
3 4 5 6 7
1 2 3
4 5 6
7 8 9
0 #
C
19 18 17 16 15 14
Function
Control Panel
8 9
10
11
12
13
2
11