Programs; Storing A Program - Ricoh MP 2510 Manual

Programs

You can store the frequently used copy job settings in the machine memory and
recall them for future use.
You can store up to 10 programs.
Note
❒ You can select the standard mode or program No. 10 as the mode to be set
when modes are cleared or reset, or immediately after the operation switch is
turned on. See "Change Initial Mode", General Settings Guide.
❒ Paper settings are stored based on paper size. So if you place more than one
paper tray of the same size, the paper tray prioritized with the Copier Fea-
tures will be selected first. See "Tray Paper Settings", General Settings Guide.
❒ Programs are not cleared by turning the power off or by pressing the {Clear
Modes} key.
Reference
"Tray Paper Settings", "Change Initial Mode", General Settings Guide

Storing a Program

Stores a program.
A
Edit the copy settings.
B
Press the {Program} key.
C
Press [Register].
D
Press the program number you want to store.
ZLFS310N
Programs
2
115