Administrator Tools - Ricoh MP 2510 Manual

Item
Stamp on Designating
Slip Sheet
Stamp Position
Superimpose
Page Numbering Initial
Letter
❖ Input / Output
Item
Switch to Batch
SADF Auto Reset
Rotate Sort: Auto Paper
Continue
Auto Sort
Memory Full Auto Scan
Restart
Select Stack Function
Letterhead Setting

❖ Administrator Tools

Item
Menu Protect
You can print the page number onto slip sheets when using the
Designate function and the Page Numbering function together.
You can set the position where the stamp is printed.
You can have page numbers printed in white when they overlap
black parts of the image.
You can select the page numbering initial letter between "P1, P2.../
P.1, P.2..." and "S1, S2.../ S.1, S.2...".
You can select to have Batch mode or SADF mode displayed when
you press [Special Original].
When you set one original at a time in the ADF, the Auto Feed in-
dicator lights for a specified time after an original is fed, to show
the ADF is ready for another original. You can adjust this time from
3 to 99 seconds in increments of 1 second.
Specify to continue copying when paper of the required orienta-
tion has run out during rotate sort.
You can specify whether the Sort function is selected when the ma-
chine is turned on, or the functions are cleared.
When memory becomes full while scanning originals, the machine
can make copies of scanned originals first, and then automatically
proceed scanning remaining originals.
Specify whether Stack or Rotate Sort has priority on the initial display.
If you select [Yes] in this function, the machine rotates the image
correctly.
Using Menu Protect, you can prevent unauthenticated users from
changing the user tools.
Description
Description
Description
7