Reproduction Ratio - Ricoh MP 2510 Manual

❖ Reproduction Ratio

Item
Shortcut R / E
Enlarge 1-5
Priority Setting: Enlarge
Reduce 1-6
Priority Setting: Reduce
Ratio for Create Margin
R / E Priority
❖ Edit
Item
Front Margin: Left / Right Specify left and right margins on the front side of copies in Margin
Back Margin: Left / Right Specify left and right margins on the back side of copies in Margin
Front Margin: Top / Bottom Specify top and bottom margins on the front side of copies in Mar-
Back Margin: Top / Bottom Specify top and bottom margins on the back side of copies in Mar-
1 Sided→2 Sided Auto
Margin: TtoT
1 Sided→2 Sided Auto
Margin: TtoB
Erase Border Width
Erase Original Shadow in
Combine
Erase Centre Width
Image Repeat Separation
Line
Double Copies Separation
Line
Separation Line in Combine You can select a separation line using the Combine function from:
Copy on Designating Paper Specify whether to copy onto slip sheets.
You can register up to three frequently used Reduce/Enlarge ra-
tios other than the fixed Reduce/Enlarge ratio and have them
shown on the initial display.
You can customize available enlargement ratios by pressing [Re-
duce / Enlarge], followed by [Enlarge].
You can set the ratio with priority when [Reduce / Enlarge] is
pressed, followed by [Enlarge].
You can customize available reduction ratios by pressing [Reduce /
Enlarge], followed by [Reduce].
You can set the ratio with priority when [Reduce / Enlarge] is
pressed, followed by [Reduce].
You can set a Reduce/Enlarge ratio when registering Create Mar-
gin in a shortcut key.
You can specify which tab has priority on the display panel when
[Reduce / Enlarge] is pressed.
Adjustment mode.
Adjustment mode.
gin Adjustment mode.
gin Adjustment mode.
When using the 1 sided → 2 sided Duplex function, you can specify
the margins on the back side. The margin is set to the same value
of "Back Margin: Left / Right".
When using the 1 sided → 2 sided Duplex function, you can specify
the margins on the back side. The value set for "Back Margin: Top
/ Bottom" is used.
Specify the width of the erased border margins using this function.
In Combine Copy or Booklet/Magazine Copy mode, you can spec-
ify whether to erase a 3 mm, 0.1" bounding margin around all four
edges of each original.
Specify the width of the erased centre margins using this function.
You can select a separation line using the Image Repeat function
from: None, Solid, Broken A, Broken B, or Crop Marks.
You can select a separation line using the Double Copies function
from: None, Solid, Broken A, Broken B, or Crop Marks.
None, Solid, Broken A, Broken B, or Crop Marks.
Description
Description
5