Reference
"Input/Output", "Tray Paper Settings", General Settings Guide
Sample copy
You can use this function to check the copy settings before making a long copy run.
Important
❒ This function can be used only when the Sort function is turned on.
A
Select Sort and any other necessary functions, and the place the originals.
B
Press the {Sample Copy} key.
One copy set is delivered as a sample.
C
If the sample is acceptable, press [Print].
The number of copies made is smaller than the specified number by one.
Note
❒ If you press [Suspend] after checking the results, you can return to step
You can change the settings for Staple, Duplex, Copy Orientation, Stamp,
Margin Adjust., and Cover/Slip Sheet. However, depending on the com-
bination of functions, you may not be able to change certain settings.
ARS023S
Copier Functions
2
A
.
55