Changing The Stamp Position, Size And Density - Ricoh MP 2510 Manual

A
Press [Edit / Stamp].
B
Press [Stamp].
C
Press [Preset Stamp].
D
Select the desired message.
You can change the position, size, and density of the stamp.
E
Press [All Pages] or [1st Page Only] to select the print page.
F
After you specify all desired settings, press [OK].
G
Press [OK] twice.
H
Place the originals, and then press the {Start} key.
Reference
"Stamp", General Settings Guide

Changing the stamp position, size and density

Changes the stamp position, size and density.
A
Press [Change].
B
Select the position for print, size, and density, and then press [OK].
Copier Functions
2
87