When copying onto regular size paper
Makes copies onto regular size paper from Paper Tray 2.
A
Select tray 2, and then press the {q} key.
B
Press [Select Size].
C
Select the paper size.
D
Press [OK].
E
Press [OK].
F
Place originals, and then press the {Start} key.
Note
❒ Steps
B
D
to
are not necessary if the size displayed on the key for tray 2 and
that of the paper set in tray 2 are the same.
❒ You can also specify the size of paper directly, using the paper size selector
for tray 2.
❒ Some kinds of envelopes might cause misfeeds and wrinkles. If this hap-
pens, push down the fusing unit's green lever. See "Envelopes". Also, be
sure to place the front face of the envelope upward.
Reference
p.30 "Envelopes"
Copying from Paper Tray 2
2
27