Changing A Stored Program - Ricoh MP 2510 Manual

Copying
E
Enter the program name.
You can enter up to 40 characters.
If you do not want to enter a program name, proceed to step
2
F
Press [OK].
The screen returns to the program screen, showing the program number fol-
lowed by the program name. The screen returns to the initial copy display af-
ter a short time.
Note
❒ Program numbers with m against them already have settings made for
them.

Changing a Stored Program

Changes program settings.
A
Check the program settings.
B
Set the contents of a program.
C
Press the {Program} key.
D
Press [Register].
E
Press the program number you want to store.
F
Press [Register].
G
Enter the program name.
You can enter up to 40 characters.
H
Press [OK].
The screen returns to the program screen, showing the program number fol-
lowed by the program name. The screen returns to the initial copy display af-
ter a short time.
Note
❒ When you want to check the contents of a program, recall the program.
❒ When it is overwritten, the previous program is deleted.
116
F
.