When Copying onto Special Paper
When copying onto special paper such as OHP transparencies, thick paper
(postcards, envelopes, etc.), and adhesive label paper, select the type and size of
paper.
Important
❒ When copying onto OHP transparencies, remove copied sheets one by one.
❒ When setting OHP transparencies, thin paper, or adhesive label paper, Staple,
Shift, or Sort functions cannot be used.
A
Open the bypass tray, and then push up the paper guide release lever.
B
Insert the paper face-down, adjust the paper guide, and then push down
the paper guide release lever.
C
Press the {q} key.
D
Select the paper type in "Special Paper".
E
Press [OK].
F
Place originals, and then press the {Start} key.
G
When the copy job is finished, press the {Clear Modes} key to clear the settings.
Copying from the Bypass Tray
2
37