Embraer EMB-505 Phenom Service Manual page 94

(c) Install the water tank on the aircraft, as follows:
1. Put the water tank in its installation position.
2. Put the belt in its installation position.
3. Remove the protective cap/plug from the hydraulic connector and
connect it.
4. Remove the protective cap from the electrical connector and con-
nect it.
5. Pass the belt through the strap.
6. Lock the belt.
D. Job Close-Up
(1) Close access panel 241EZ.
(2) Remove the circuit breaker ring and tag from this circuit breaker, and close it:
• WATER PUMP-INTERIOR/IFE CBP (AUX SHED DC BUS 1)
CAUTION: TO PREVENT DAMAGE, EXAMINE ALL THE WORK AREAS
TO MAKE SURE THAT YOU REMOVED ALL TOOLS AND
EQUIPMENT AFTER YOU COMPLETED THE WORK.
(3) Remove from the work area all tools, equipment, and materials that you used.
EFFECTIVITY: ALL
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
GROUND HANDLING AND
SERVICING HANDBOOK
12-15-01-613-801-A/300
Page 302
NOV 20/09