Embraer EMB-505 Phenom Service Manual page 118

(n) Remove the Velcro tape again.
(o) Install the cover to the seat.
E. Acrylic Parts - Cleaning
(1) Lightly rub the surface with a lint-free cloth soaked in neutral detergent to
fully clean the surface.
(2) Use a lint-free cloth soaked in clean water to fully remove the detergent.
(3) Rub the surface dry with a lint-free cloth.
(4) If necessary, clean the surface with a lint-free cloth moist with Naphtha
and detergent.
NOTE: Do not let Naphtha touch the plastic surfaces. Naphtha can
cause damage to them.
(5) Rub the surface with a lint-free cloth soaked in neutral detergent to make
sure that it is fully clean.
(6) Fully remove all detergent with a soft cloth soaked in clean water.
(7) Rub the surface dry with a lint-free cloth.
F. Leathers - Cleaning
(1) Do the regular Cleaning as follows:
(a) Prepare the neutral detergent solution (refer to the manufacturer's
instructions) and apply only foam to leather with a lint-free cloth.
Lightly wipe with circular movements.
(b) Remove all detergent with a lint-free cloth soaked in water.
(c) Rub the surface dry with a lint-free cloth.
(2) Remove the spots as follows:
(a) Clean stains (coffee, milk, liqueur, etc.) with neutral detergent (Refer to
the manufacturer's instructions).
(b) Clean stains (grease, oil, etc.) with a lint-free cloth soaked in MIL-PRF-
680 Type I or equivalent.
(c) Remove all detergent with a lint-free cloth moist with clean water.
(d) Rub the surface with a dry lint-free cloth.
G. Metal Surfaces - Cleaning
CAUTION: WHEN YOU SOAK THE CLOTH, DO NOT PUT IT OVER
THE SOLVENT CONTAINER MOUTH AND TURN THE CON-
TAINER. THIS CAN CAUSE CONTAMINATION OF THE SOL-
VENT SOURCE. ALWAYS POUR THE SOLVENT ONTO THE
CLOTH OR USE A DISPENSER CAN DESIGNED TO ISO-
LATE CONTAMINATS.
CAUTION: DO NOT LET SOLVENTS TOUCH THE DECOR MATERIAL OR
PLASTIC COMPONENTS. MEK AND ACETONE CAN CAUSE
DAMAGE TO SOME COMPONENTS AND MATERIALS.
(1) Clean the metal surfaces with solvents as follows:
EFFECTIVITY: ALL
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
GROUND HANDLING AND
SERVICING HANDBOOK
12-23-00-100-802-A/300
Page 310
NOV 20/09