WARNING: USE EYE PROTECTION WHEN YOU REMOVE OR
(a) Cut the lock wire from the electrical connector.
(b) Disconnect the electrical connector from the connector of the battery 2.
(c) Put a protective cap on the electrical connector and on the connector
of the battery 2.
(d) Loosen the self-locking retainer.
(e) Carefully pull and remove the battery 2 from the aircraft.
EFFECTIVITY: ALL
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
INSTALL LOCK WIRE OR SAFETY CABLE. IF YOU
DO NOT USE EYE PROTECTION, PIECES OF WIRE
CAN HIT YOUR EYES AND CAUSE INJURY TO THEM.
GROUND HANDLING AND
SERVICING HANDBOOK
24-36-01-000-801-A/400
Page 402
NOV 20/09