HearthStone Windsor Bay 8830 Owner's Manual And Installation Manual page 18

HearthStone Quality Home Heating Products Inc
connected to the two connection screws on
the back of the
instructions received with the thermostat).
Take care not to over-tighten the connection
Wire
Thermostat (2 wires)
Thermopile (2 wires)
The proper location of wire connections is shown in Figure 5.
NOTICE: A qualified technician must connect the heater to the gas supply and leak test the
unit before it is approved for use. Consult all local codes.
¦ WARNING: The unit must be installed and connected in accordance with local codes, or in
the absence of local codes, with the most current edition of the National Fuel Gas Code
ANSI Z223.1.
thermostat per the
L W
OCATION OF
Location
1-Top Post on Valve
1Bottom Post on Switch
1-Bottom Post
1-Middle Post
screws and not to damage the internal parts
of the thermostat. Now attach the wires in
their proper location on the fireplace, shown
in Figure 5.
C
IRE ONNECTIONS
18
Windsor Bay Model #8830
:
Label
TH
T'STAT
TP/TH
TP