HearthStone Clydesdale 8490 Owner's Manual
  1. Manuals
  2. Brands
  3. HearthStone Manuals
  4. Indoor Fireplace
  5. Clydesdale 8490
  6. Owner's manual

HearthStone Clydesdale 8490 Owner's Manual

Non-catalytic wood fireplace insert
Hide thumbs Also See for Clydesdale 8490:
Table of Contents

Advertisement

Quick Links

PLEASE READ THIS ENTIRE OWNER'S MANUAL BEFORE YOU INSTALL AND USE
YOUR NEW Clydesdale WOOD FIREPLACE INSERT. To reduce the risk of fire, follow the
installation instructions. Failure to follow these instructions may result in property damage,
bodily injury, or even death.
CONTACT LOCAL AUTHORITIES HAVING JURISDICTION (BUILDING
DEPARTMENT or FIRE OFFICIALS) ABOUT PERMITS REQUIRED, RESTRICTIONS
AND INSTALLATION INSPECTION IN YOUR AREA.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE!
Clydesdale
Non-Catalytic Wood
Fireplace Insert
OWNER'S MANUAL
INSTALLATION AND OPERATING
INSTRUCTIONS
(8490)
Clydesdale Model# 8490
6400-10446
August 26,2004

Advertisement

Table of Contents
loading

Related Manuals for HearthStone Clydesdale 8490

Summary of Contents for HearthStone Clydesdale 8490

  • Page 1 Clydesdale (8490) Non-Catalytic Wood Fireplace Insert OWNER'S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS PLEASE READ THIS ENTIRE OWNER’S MANUAL BEFORE YOU INSTALL AND USE YOUR NEW Clydesdale WOOD FIREPLACE INSERT. To reduce the risk of fire, follow the installation instructions. Failure to follow these instructions may result in property damage, bodily injury, or even death.

  • Page 2: Table Of Contents

    OPERATING YOUR CLYDESDALE WOOD FIREPLACE INSERT ........... 13 ........................13 ONTROLS EATURES ..........................13 HOOSING IREWOOD ........................... 14 UILDING ..................14 REAKING IREPLACE NSERT MAINTENANCE ..........................16 TROUBLESHOOTING........................18 ............................21 AFETY ABEL HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...

  • Page 3: Introducing Your Clydesdale Wood Fireplace Insert

    EPA certified, non-catalytic wood are used or stored. burning Fireplace Insert. You can be proud to join the HearthStone f a mily with our Premier Cast Iron Wood SAFETY NOTICE: Burning Fireplace Insert. The generous depth and width...

  • Page 4: Codes

    Keep children and pets away from the stove; they Inspect the stovepipe, chimney connector and could be burned by touching a hot stove. chimney, as recommended. Clean your chimney system as needed. HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 5 To remove the Clydesdale for inspection purposes, simply disconnect the venting from inside the firebox. Carefully remove the surround from the insert, and slide the insert away from the fireplace. HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...

  • Page 6: Specifications

    Actual Weight 550 pounds foot of firebox volume). Castings Finish Painted Matte; and Porcelain Maximum Log Length. 22” (55.9 cm) - front door Enamel (Blue/Black) Figure 1 Clydesdale Dimensions HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...

  • Page 7: Setting Up Your Clyd Esdale Wood Fireplace Insert

    1-800-344-3555 opening 1-617-770-3000 Hearth must be non-combustible material with "R-Value" atleast 1.1 Figure 3 Hearth Requirements * Installations in Canada require 18” (45.72 cm) of floor protection in the front. HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 8 Horizontal still air HearthStone’s Thermo-Ceramic Baffle System To enhance the combustion efficiency and reduce the emissions of the fire in your stove HearthStone QHHP, Inc. has developed an advanced THERMO-CERAMIC baffle system. This system uses a lightweight, durable ceramic material above the burner tubes to maintain the high temperatures in the secondary combustion area and maintain t h e low emission –...

  • Page 9: Installing The Surround

    National Fire Protection Agency (NFPA) Sections (3+4) of the surround into position as approved wall protection system. Please refer to NFPA illustrated in Figure 4. Secure them to the top HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...

  • Page 10: Venting Components And Configuration

    HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...

  • Page 11: Connecting To A Prefabricated Metal Chimney

    8. Have a permanent metal warning label (provided with increased creosote accumulation. the Clydesdale—see illustration to the below) attached to the fireplace by riveting it to the outside wall, stating that REMOVE DAMPER OR WIRE IT OPEN HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 12 Figure 7 Connecting to a chimney HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...

  • Page 13: Connection To A Masonry Chimney

    6” off the hearth or floor. In order to finish At least 3 feet (0.9 m) higher than the highest part of the surrounds, HearthStone offers a surround cap kit. See the roof opening through which it passes. the illustration in figure 8 to see the placement of the At least 2 feet (0.6 m) higher than any part of the roof...

  • Page 14: Operating Your Clydesdale Wood Fireplace Insert

    LOGS OR ANY OTHER MATERIALS AS FUEL; adequate seal. Remove the two screws where the hinges THEY ARE NOT SAFE. DO NOT BURN will go on the left side. Rotate the door 180 degrees, and GARBAGE. HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...

  • Page 15: Buildinga Fire

    IREPLACE NSERT It is imperative that your Fireplace Insert be "broken in" slowly. Cast iron must be "seasoned"; over-firing a new Fireplace Insert may cause castings to crack or may HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 16 Fireplace Insert before proceeding with normal HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...

  • Page 17: Maintenance

    After reloading with wood, burn the Fireplace Insert with the primary air control fully open for 20 to 30 minutes. This manner of operation ensures early engagement of the secondary combustion system which, HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 18 Apply penetrating oil to the screws.. Remove the screws to separate the glass from the door. Carefully lift the damaged glass from the door and discard. Replace the screws. Install the door. HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...

  • Page 19: Troubleshooting

    When selecting a site for a new chimney, take care to consider the placement of other objects near the proposed chimney location. HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...

  • Page 20: Clydesdale Model

    Do not over-fire the Fireplace Insert. Monitor Fireplace Insert ENAMEL CASTING temperatures. Use seasoned wood only. Excessive Draft Check the DRAFT. Operate the Fireplace Insert at a LOW BURN range. HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 21 94-57900 Blower Assembly 94-5970510 Matte Surround Caps 94-5970559 Blue/black Surround Caps 94-79700 Mantle Shield 94-69900 Screen Kit 94-5990010 Surround Extension 94-5970710 Matte Double Surround Caps 94-5970759 Blue/black Double Surround Caps HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...

  • Page 22: Safety Label

    U.S. ENVIRONMENTAL PROTECTION AGENCY Certified to comply with July 1, 1990 particulate emissions standards Date of Manufacture 2004 2005 2006 DO NOT REMOVE OR COVER THIS LABEL MADE IN USA 3300-617 HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 23 “Original Purchaser”) the new woodstove manufactured by HearthStone and purchased by the Original Purchaser (the “Woodstove”) against any of the occurrences listed in this document that result from defects in material or workmanship. All obligations of HearthStone under this document commence on the date the Original Purchaser purchases the Woodstove (the “Purchase Date”).
  • Page 24 12. A defect in any part of the Woodstove if the Original Purchaser fails to comply with HearthStone’s or a Dealer’s request to ship the part or the Woodstove to HearthStone or a Dealer, as the case may be.
  • Page 25 Woodstove is located. In the event the Original Purchaser refuses to allow a Dealer to make a service call, HearthStone or a Dealer, as the case may be, will request that the Original Owner return the defective part, or the entire Woodstove (if needed), with shipping prepaid, to HearthStone or a Dealer.
  • Page 26 (see Photo #2). Once these bolts are loosened, lift the baffle assembly off the bolts and maneuver it so it can be laid on the floor of the firebox. HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 27 Lag screw and clip on front of stove is shown. There are two on the front and one in the back. Remove all three to take the unit off the pallet. HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 28 Reattach the door catch on the opposite side of the stove by reusing the retaining screws and spacer washers. HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 29 (Front-Back) 2. Is there sufficient clearance above the unit to install the flue liner to the installed flue collar? If not, the baffle can be removed the flue collar can HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 30 Note: If access to the top of the firebox is restricted, you will want to install the bracket for the surround now. For installation details see step 10. HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 31 Step Seven: With the unit located in the desired position within the fireplace, level the unit using a 9/16” socket wrench on the three leveling bolts (see photo #10 on the next page). HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 32 I.D. # I UANTITY LLUSTRATION 4-1/2” x 9” 4-1/2” X 4-1/2” ______ 4-1/2” X 12” Angled Cut ______ 4-1/2” x 11-1/4” Angled Cut HOTO Installation of the stones on the floor. HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 33 Slide retaining clip down onto bolt heads and tighten. HOTO Install the left and right side stones and secure with the shorter side stone HearthStone Quality Home Heating Products Inc ® retaining clips. Clydesdale Model 8490...
  • Page 34 Surround bracket pulled fully out (white paper placed on stovetop for contrast. Large arrows indicate location of access to the retaining screws. Loosen / tighten with phillips screwdriver. Surround attaches here HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...
  • Page 35 Side view of the ash lip showing phillips screw that must be tighten when ash lip is placed back on the unit. Read the Owner’s Manual for all other installation and operational requirements. HearthStone Quality Home Heating Products Inc ® Clydesdale Model 8490...

Table of Contents