Electrolux 266200 Installation And Operation Instructions Manual page 15

UTILITIES
cycle
Fan speed *
Injection of water in compartment
Programmed Start
Store programs
* The default speed is the maximum and never appears in
the information fi eld, whereas the others will appear if selected
(half or pulsed).
INFORMATION
175° compartment temperature
28° core probe temperature (C°)
01:58 clock (1 hour : 58 minutes)
4.4.1 MULTIPHASE
Food can be cooked with different modes during its cycle and
therefore in different phases.
The oven enables programs consisting of several sequential pha-
ses (up to a max. of 15 phases). During cooking, going from one
phase to the next occurs automatically, until automatic stopping
of the program with completion of the last set phase.
A cycle with several phases is set by carrying out the following
operations:
1) switch the oven on;
2) Set for PHASE 1:
- cooking mode (humidifi cation if necessary);
- compartment temperature;
- cooking time (or alternatively the core probe temperature).
3) Press the "Phase" button and then the "Add new phase" button.
4) For PHASE 2 and following, set as per PHASE 1.
When there are several phases, these will be listed, giving the
relevant settings (an arrow will scroll the next ones which are
not displayed).
Manual
Phase
1 of 12 1 of 1
5 5 160° 0:30 160° 0:30
1 1
120° 1:15
2
50%
225° 0:45
3
0:15
4
48°
160°
Add New Phase 0:30
0:30
Add Pause Save Program
(see page 40)
HOT AIR
x
x (from 10sec. to 120sec.)
x
x
(real data)
(C°)
Skip phase basket
Utilities (in drawer)
Pause phase
Scroll list arrow
Add phase button
Auxiliary functions
The fi gure shows phase 1 with the following settings:
1 phase number
Hot Air cycle
5 humidifi cation
160° temperature (C°)
0:30 cooking phase time (0 hours : 30 minutes)
Also, one or more phases can be skipped during cooking; press
the symbol next to phase 3 (ex. in fi gure) to go to this.
3
The Multiphase also has special phases, such as:
- Pause for setting a pause between cooking cycles.
- Maintaining cycle with the possibility of setting a food tem-
perature that is kept constant for an infi nite time 8
4.4.2 MULTITIMER
With the MultiTimer system it is possible to set a different time for
each recipe (chicken, potatoes, etc.) or for each pan placed on
the various levels, e.g. starting from level 1 at the top and going
down to 2, 3, etc.
This function also allows the oven to be used with an "à la carte"
menu, where the food can be placed in the oven at the required time.
To set the MultiTimer, proceed as follows:
1) open the drawer in Manual mode and press the relevant button
MultiTimer button
Then press the following buttons:
2) START cycle start for setting the Multitimer
START
3) MultiTimer to access the setting of times.
MultiTimer -------- >
4) Timer1 and enter the recipe name (chicken, potatoes,
etc).
5) --:-- and enter the time with the keypad.
For Timer2 and following, set as per Timer1.
To start the cooking cycle, open the oven door, load the food and
close the door.
The MultiTimer will start the countdown with the position having
the shortest time setting.
At the end of each set cooking time the oven will sound a beep
to indicate the type of food cooked. Open the door and remove
the ready to serve product.
45
50% 50%
225° 0:45
Manual
Multitimer
Timer 2:
Timer 1:
-- : -- -- : --
Timer 4:
Timer 3:
-- : -- -- : --
Timer 5: Timer 6:
-- : --
-- : --
Timer 7: Timer 8:
-- : --
-- : --
Timer 10:
Timer 9:
-- : -- -- : --
Timer 12:
Timer 11:
-- : -- -- : --
Timer 13: Timer 14:
-- : --
-- : --
GB