Download  Print this page

Electrolux 266200 Installation And Operation Instructions Manual page 17

Electric convection ovens
Hide thumbs

Advertisement

4.3.6 CORE PROBE USE
(PRODUCT CORE TEMPERATURE CONTROL)
The core probe allows accurate control of the core temperature
of the product being cooked. This enables setting of the required
value (from 10°C to 99°C) and automatic stopping of cooking
when that value is reached.
Attention: The core probe is a precision component.
Absolutely avoid impacts, forcing when inserting, and
pulling of the fl exible cable (in particular when using
the trolley-mounted structures). The warranty does
not cover the replacement of core probes damaged by impro-
per use.
After selecting the time icon select that of the core probe and
press START to start the cycle.
- Wait until the compartment temperature fi eld indicates reaching
of preheating (the message LOAD appears).
- Open the door and introduce the product to be cooked.
Attention! Risk of burns.
Always open the door with caution when the oven
is hot.
1) Remove the core probe "A" from its seat "B" and insert it in
the product without forcing excessively, making sure the tip (the
sensitive part) is positioned near the centre of the product.
1-sensor core probe
- Close the door and press the START button.
2) Stopping the cycle. When the required product core tempe-
rature is reached the oven stops automatically and the elapsed
cooking cycle time is displayed.
3) Core probe mode deactivation. Set a cooking time on the
Timer
. This action automatically cuts out the core probe,
whereas it is the opposite when the time is set.
The core probe mode is also deactivated when the oven is
switched off.
Note:
With vacuum packed food products it is necessary to use the
special external core probe (accessory available on request), to
be connected to the USB socket. For its use, see the instructions
included with the accessory.
A
B
4.3.7 END OF COOKING
At the end of the set time, the cooking cycle automatically stops
and the oven buzzer sounds continuously.
The display shows the message:
COOKING FINISHED !
Several parameters such as the following are also displayed:
- total time
Open the door and remove the product.
Attention! Risk of burns.
Always open the door with caution when the oven
is hot.
Notes:
- The buzzer can be stopped in advance by carrying out any
operation on the control panel or by opening the door.
The cooking cycled can be manually stopped by keeping
the STOP button pressed for a few seconds.
A cycle identical to that just completed can be repeated by
pressing the START button again.
The maintaining (HOLD) cycle can be done.
47
GB

Advertisement

loading

  Related Manuals for Electrolux 266200