Index Information Cleaning and Maintenance - Important Information Safety Information Cleaning and Maintenance - Schedule Daily Cleaning Touch Control Touch Control Step 1 Touch Control Step 2 Touch Control Step 3 Daily Cleaning Dial Control Dial Control Step 1 Dial Control Step 2 Dial Control Step 3 Monthly Cleaning Touch Control / Dial Control Drip Tray...
• All Electrolux ovens come standard with an automatic cleaning function, this should be used frequently before soil build up occurs. Before running this automatic cycle, ensure that the cleaning fluid levels are at a sufficient level.
Daily Cleaning - Touch Control Touch Control Step 1 • Allow oven to cool prior to cleaning. DO NOT use water to cool the oven • Check chemical level in the chemical containers below the control panel. Top up levels if required (minimum 1/3rd of tray) •...
Daily Cleaning - Dial Control Dial Control Step 1 • Allow oven to cool prior to cleaning. DO NOT use water to cool the oven • Check chemical level in the chemical containers below the control panel. Top up levels if required (minimum 1/3rd of tray) •...
Monthly Cleaning Drip Tray • Check the drip tray at the bottom of the unit for water and or soil/waste • Pull the drip tray downward, then across towards the oven cleaner tank • Clean in warm soapy water, ensuring the drain hole is clear of any soil build u •...
Programmed Maintenance Inspection • Programmed maintenance (servicing) of the oven should be completed every six months. This will ensure your oven is running at a satisfactory standard at all times and will identify any areas the oven may require attention before an issue occurs. To organise a service contact the Stoddart Service Department •...
Descale Air-O-Steam Touch Control (Boiler) • When there is an excessive build up of scale in the steam generator the icon will turn on, signalling the need to carry out de-scaling (even if the icon does not appear, descalling should be performed at a minimum every 6 months) The de-scaling process takes 3+ hours International...
Descale Air-O-Steam Dial Control (Boiler) • When there is an excessive build up of scale in the steam generator the icon will turn on, signalling the need to carry out de-scaling (even if the icon does not appear, descalling should be performed at a minimum every 6 months) The de-scaling process takes 3+ hours Turn off water supply at the isolation tap.
Filter Cartridge Replacement Water Filtration • Water filtration is critical to the performance of your oven. Users must establish a regular filter replacement schedule. Required frequency will depend on your water quality and type of filtration system • Filter change frequencies below are indicative minimums. If your water quality is poor, you may need to replace the filter more frequently •...
Information and Error Codes Information Codes • These codes may appear on the display • Codes indicating a value, function or state Information Information Code Description Code Cleaning system program switched on Clnt Semiautomatic cleaning program switched on cont Unlimited time setting cool Oven cooling on ECLO...
Consumables Order Form Order form Scan/Copy - Complete - Email to: spares@stoddart.com.au or Contact 1300 307 289 Please have your payment details on hand, as they will be required when finalising your order Name of Business: Name of Contact: Delivery Address: Suburb: State: Postcode:...
Need help?
Do you have a question about the Air-O-Steam - Dial Control 6-1/1 and is the answer not in the manual?
Questions and answers