The functions in MANUAL Cooking mode are as follows:
cycle HOT AIR
compartment vent open
compartment vent closed x
Eco Delta *
MM:SS (short cooking cycles) -
Eco Delta: on setting the temperature range, a small
triangle will appear as a reference next to the value; also, the
time bar goes to that of the core probe
E.g. In the HOT AIR cycle, as indicated in the previous table, it
is possible to set the Humidiﬁ cation, Temperature, Time or Core
Probe, and Temperature with Eco Delta, compartment Cooling,
endless Time for continuous Cooking (conventional cooking) and
Short Cooking Cycles (MM:SS).
To set the data of the various functions, a keypad like the following
To zero-set the value just entered, touch the
0 on the keypad.
If a function (e.g. Eco Delta
set on the keypad, to cancel it just touch the
same button again.
To return to the initial setting, select another
cycle and return to the same.
Cooling: it is possible to set an oven
compartment cooling temperature to be
reached, which will be indicated with the
corresponding symbol on the cooking in
Compartment cooling therefore occurs
manually and is done outside the cooking
for the relevant setting.
To add more functions, there are the UTILITIES situated in the
DRAWER and selected as cooking cycle variables.
) has been
x (max. 8 hours) x (from 10° to 99°)
x (from 20° to 120°)
max. 59 min. and 59 sec.